This Phoenix Service Software installation package includes following SW components:
Phoenix Service Software 2010.8.4.41526
DK2 Dongle Driver v 22.214.171.124
Nokia Connectivity Cable USB Driver v 126.96.36.199
Flash Update Package 09.050.025
FLS-x Dongle Driver v 2.09.28
Changes/improvements made from previous version 2009.34.14.40684:
New products added: RM-601, RM-656, RM-657, RM-659, RM-559, RM-610, RM-618, RM-639,RM-632, RM-633, RM-634
Products removed: RM-623
Nokia Connectivity Cable USB Driver Version 188.8.131.52
Flash Update Package 09.050.025
Menu item WLAN Auto tune added for E72 product
New RF Losses.ini v 47 for auto tune
Product Code Change – window is now scalable, SW version information for variants can now be seen if window is made larger.
Error corrections & changes:
Support for FPS-8 and FPS-11 Flash Prommers removed
Bluetooth Flasher – menu removed
Flash Memory test removed
Changes to WLAN UI to support new WLAN component versions
Auto tuning components updated to new version
Label printing changes to improve handling of older data package configurations. If product has older data package configuration, the user is advised to enable this option from the label printing UI
Improvements to Data Package Download. When computer has active internet connection, product code specific SW files are downloaded from Firmware Repository. Please note that the path for downloading files must also be configures to “Options / Product Location” UI. If paths are not the same, downloaded SW files are not found.
Registration error for manual TX power level tuning component corrected.
Minor menu Changes for RM-598 and RM-604
Known errors & limitations:
Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data Package 2 concept.
Flashing with Flashing with FLS-5, SS-46 and product specific adapter is not supported anymore
If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current information during installation. If you experience problems when updating FPS-x prommers, please check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is “C:Program FilesCommon FilesNokiaTssFlash”. If not, Phoenix will show error “Update via ini – file failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
Multi Flash has limited capabilities, launch Multiflash UI first and then connect phones one by one, do not attempt to service more than 5 phones at the time
Some phone models request SIM Lock data to be written in wrong format.You should use special DLL as a workaround for this product software related problem. Please see Common SB SB-102 “Tucson Add-On Components for SIM Lock version”
While performing restore or variant change operations with Tucson system firmware update as a separate activity may increase stability.
Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be available
FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version is needed to correct this, and it is estimated to be available during 2nd half of 2010
Please refer to product specific documents and instructions concerning the limitations of the RX-51 product