Phoenix Service Software 2011.08.003.45122

Main component versions in the release:
DK2 Driver Version 07.14.0.25
Nokia Connectivity Cable USB Driver Version 7.1.36.0
Flash Update Package 2011.004.000
FLS-x Drivers Version 2.09.28
FUSE Connection Manager v 2011.60.2

MAIN CHANGES & ERROR CORRECTIONS FROM PREVIOUS VERSION 2011.2.0.44482
New Products added
RM-779, RM-772, RM-774, RX-67, RM-743, RM-767, RM-768, RM-766, RH-130, RH-131, RM-769,
RM-770, RM-771, RM-750, RM-751

New features
New version of FUSE connection Manager
New version of Flash Update Package
New version of Autotuning components
New version of Product API
New version of Tucson components
DCT-4 tucson menu support added for RM-607, RM-608, RM-643 and RM-644 to enable DCT-4
product code changes.
Envira – Tool added to “Help” – “Troubleshooting” – menu. This tool enables log file collection in case
of problems.

Error Corrections & changes
RSSI Reading correction for phones using “Voyager” – RF engine
Workaround to RX-51 phone SW related error which caused security self test fail: Tuning values are
now force written to product after combo memory has been replaced and product is autotuned
successfully
Corrections to autotuning / certificate restoring in cases when flash / combo memory was been
replaced and security self tests were failing
Old look & feel implemented to UI because new one in previous release release caused some problems
Improvements to correct some memory leaks
Certificate reading improvements to phones using Quantum RF engine
“FPS-10 conf” – button remamed to “FPS-X conf” in the Prommer Maintenance UI
Please note:
New common data package location in use.Please see document SR1315 in KICS Information Center
for further information.
All Nokia Service SOftware Applications will use following location for product specific data:
– Windows XP: C:Documents and SettingsAll UsersApplication DataNokiaPackages
– Windows 7: C:Program DataNokiaPackages
This version contains the latest Tucson components. Therefore it is not necessary to use Tucson
Add-On Installation Packages
Before you start Phoenix or Care Suite installation to Windows 7 the User Account Control (UAC)
should be turned off from Windows Control Panel settings.
For more information concerning new options in “Firmware Update” – menu and their use, Please see
document SR1313 in KICS Information Center.
Product Code changes for USB Only – phones (RX-51, RM-596 etc) work only when used with FPS-21
Flash Prommer and USB connection from prommer rear panel to phone. Please select USB as Product
Active Media
Do not use Flash option simultaneously with product code change for USB Onbly phones, flash phone
separately with Firmware Update
It is recommeneded to use FPS-21 flash prommer with TCPIP connection when refurbishing USB Only
– phones (RM-596 etc) due to mandatory optional MMC file size.

KNOWN ERRORS & LIMITATIONS
Software downgrade with Tucson system is only possible for BB 5.0 products supporting the Data
Package 2 concept.
Flashing with setup FLS-5, SS-46 and product specific adapter is not supported anymore. FLS-5 can
be used with other product specific cables and adapters, but not with SS-46 Interface Adapter.
If you install old DCT-4 data packages, Flash Update Package File installation path may be wrong. This
is caused by very old DCT-4 data packages which contain Flash Update Package and overwrite current
information during installation. If you experience problems when updating FPS-x prommers, please
check that Phoenix “Prommer maintenance” is looking for the files from the correct location which is
“C:Program FilesCommon FilesNokiaTssFlash”. If not, Phoenix will show error “Update via ini – file
failed”. In this case, select “Update” from that Phoenix “Prommer maintenance” – UI, browse to correct
directory and select “fpsxupd.ini” for all other prommers except the FPS-8.
Refurbishment flashing and product code change for RX-51 product requires SX-4 card to be
available.
FPS-21 flashing for RX-51 works only with TCPIP connection. FPS-21 prommer with new HW version
11 has been released to correct this. Sales pack code is 0089J83 , old HW version is not delivered
anymore
Please refer to product specific documents and instructions concerning the limitations of the RX-51
product
RX-51 flashing does not work when CU-4 is used
RX-51 Product Code changes work only without FLASH option, please flash phone separately
When version 2010_12_8_42304 or newer with FUSE connection manager is installed on top of older
Phoenix versions, there may be an additional delay of several minutes when you start Phoenix for the
first time. Please wait patiently; Phoenix will start after configuration is finished.
When using Data Package download functions with online connection, download times may
occasionally be long. This is not caused by Phoenix (or Care Suite). The download speed from online
servers is occasionally is known to be slow, depending on how data is buffered on caching servers.
Note concerning the installation and use with Administrator and User rights
– If you install Phoenix, start Phoenix and configure connections from FUSE connection manager as
Administrator, you may not be able to start Phoenix after you log off and try to use Phoenix with User
Rights afterwards
If you experience the above mentioned problem:
– Log on as Administrator
– Deleted Fuse folder and its contents from: C:Documents and SettingsAll UsersApplication
DataNokia
– After this Fuse’s connection list will be empty and it can be used directly with guest/admin rights.
– This has to be done only once.
After you close Phoenix, it may not restart. To rectify this:
– Use Windows Task Manager to manually shut down phoenix.exe and FuseService.exe processes, or
optionally restart your PC
It is not possible to program Mass Media Content file to some devices over direct USB cable
connection, due to the large size of the file. For these models a feature called “Media Check” has been
implemented. When this type of product is connected to service software / PC via direct USB cable the
refurbishment option will be disabled. Please use a flash prommer.
To be able to use the help files in Windows 7 you need to install Windows Help program
(WinHlp32.exe) for Windows 7. Ways to locate WinHlp32.exe:
– Start Phoenix with online connection to Internet, select “Help” and “Phoenix help”. Click the
“Microsoft Help and Support” website link. Download WinHlp32 and install it.- Go to
https://www.microsoft.com . Type “WinHlp32” to “Search Microsoft.com” – field. Locate
Windows Help program (WinHlp32.exe) for Windows 7 and install it
When using flash prommers, only one connection type to one prommer is allowed. Please use either
NFPD USB or NFPD TCPIP connection to one prommer, not both connections to same prommer

Supported operating systems and user rights
Windows XP Service Pack 1 or higher
When installing Phoenix into Win XP you must have local admin rights.
When using in Win XP, user must have power user rights.
Windows 7 32 Bit version

One Reply to “Phoenix Service Software 2011.08.003.45122”

Leave a Reply

Your email address will not be published. Required fields are marked *